Concept SET-SWB| STD-ST/WA-ST/SH1-SH2 (shelf quantity)

Product Code: SET-SWBSET-SWB| STD-ST/WA-ST/SH2-FESTOOL

Product Range: Concept

Concept SH2 power tools only

Right hand install consists of 4 units

• 1️⃣ Standard Unit 429mm SH2 Festool

• 2️⃣ Standard Unit 429mm SH2 Festool

• 3️⃣ Wheel Arch Unit 429mm SH2 Festool

• 4️⃣ Wheel Arch Unit 429mm SH2 Festool

Left Hand Install: Consists of 2 units

• 5️⃣ Wheel Arch Unit 429mm SH2 Festool Systainer
• 6️⃣ Wheel Arch Unit 429mm SH2 Festool Systainer

Level Rail Pipe Box: These can be added to any of the following installs and can be found here

Not Included Please use search bar Level or Rail to add products

End Unit Storage: These can be added to any of the following installs and can be found here

The only thing you need to check is you have enough room for your install. All end units are 322mm unless specified else where. Simply add this measurement to your install length to maximise your storage. All end units can be cut down if required by up to 150mm.

If the curve on the back doors becomes a problem you can order a shorter end unit to help fit better. If you are unsure give us a call and one of the team will talk it through with you.

Not Included Please search for End Units to add products

Additional Extras: Check out the catch options on all the install options, some come with a pull hole only, the next option is a standard push to open catch, or if the upgrade catches are purchased separately when the order is placed the team will be sure to make sure you have the cut out for the upgraded catches.

Supplied as a 6 unit install for short wheelbase vehicles 4 on one side, 2 on the left, the left side measure 858mm long shown in the description as unit 5-6. This install includes standard push button catches finished in satin chrome with a white catch.

Install Height: 1200 mm

Install Length: 1716mm - 1896mm1716 mm

Install Depth:

• Standard Depth units 545mm overall with 130mm scribe panel on the rear and a shelf depth of 380mm.

With vehicle fitment we make sure each unit can fit any vehicle with 130mm scribe panel on the rear. This can also be re fitted to any vehicle by simply re scribing. With the sizes above you can simple measure van height and length to see if this is the perfect configuration for you.

Standard HEIGHT options include:

1000mm Small connect size van

1200mm Transit Custom H1 size van

1500mm Transit H2

1775mm Sprinter, Crafter H3

Install Length can vary on storage requirements and budget. This can be configured to suit you and your tools also.

We don't just build racking to suit a van make or model. We build van racking to suit you and your tools & the way you work. A small amount of time now will help your future later.

To get organised working smarter, finishing earlier.

Who is this built for?