Van Racking Parts – Information Base
Codes and CNC toolpath operations for shelves, tops/bottoms, wheel-arch components, trays, drawers, and back stays.
Shelf/drawer bases (SH-[Width]-[Type])
Codes
Widths: 429, 474, 500, 584, 600, 629, 803, 850
Widths Available : 249-1200 (unlimited only)
Type: 1 = Concept · 2 = Unique · 3 = Pro Unique
Toolpath Summary
- Fixed shelf holes — Ø3 mm, through.
- Drawer/tray front holes — Ø3 mm, through, min 2 front, 2 rear & 1 at each side front, add at 150 mm (Type 3). (Extra holes required if adding extra deep drawer option.
- Recessed feet — Ø10 mm EM (end mill) or 6 mm cutter, 4–6 mm deep (Type 2–3). Tool depending on feet recess holes (larger tool for larger feet holes)
- Mortices for drawers/trays — Ø6 mm, 12 mm through.
Top/Bottom Panels (TB-[Width] and variants)
Variants
TB, TB+, TB-SL, TB-SL+
Toolpath Summary
- Front fixing holes — Ø3 mm, through, min 2 front, add at 150 mm if wider.
- Recessed feet (on “+”) — 10 mm EM (End Mill) or 6 mm, 4–6 mm deep.
- Perimeter profile — Ø6 mm, full cut.
Wheel Arch Bottom Panels (TBW-[Width] and variants)
Variants
TBW, TBW+, TBW-SL, TBW-SL+
Toolpath Summary
- Front fixing holes — Ø3 mm, through, 2 front.
- Cut-outs by system: handle oblong (Concept), round Ø35 (Unique), EVO 40×30 (Pro Unique).
- Recessed feet (on “+”) — 10 mm EM (End Mill) or 6 mm, 4–6 mm deep.
- Perimeter profile — Ø6 mm, full cut.
Back Stays (BKS-[Width])
Toolpath Summary
- Profile — Ø6 mm, full cut, outside path.
Quantity by Unit Height
≤1200: 1 · 1200–1500: 2 · 1500–1775: 3 · >1775: 4
Tray Parts (TR-44, TR-108, TR-172)
-
Widths: 429, 474, 500, 584, 600, 629, 803, 850,
Widths Available : 249-1200 (unlimited only)
- Sold in pairs. Fit Pro Unique shelves SH3 or SH3+
- Mortice clearance aligned to shelf.
- Manufacturing CNC cut options: Box (Ø6 mm, 6.5 mm deep, profile inside) or Line (Ø10 mm, 6.5 mm deep, profile on).
- Perimeter profile — Ø6 mm, full cut.
Drawer Parts (DR-44, DR-108, DR-172)
-
Widths: 429, 474, 500, 584, 600, 629
Widths Available : 249-700 (unlimited only)
- Set includes front (with handle), back, two sides. Base is SH-[Width]-3
- Available on: Drawer Stacks Unique SH2 with Pro Unique SH3+, or Pro Unique SH3.
- Handles: round ~2 x Ø45 holes or rounded-rect new design SEP 2026; tool Ø10 mm through or Ø6 mm inside, through.
- Bottom mortices:Box (Ø6 mm, 6.5 mm deep, profile inside) or Line (Ø10 mm, 6.5 mm deep, profile on).
- Perimeter profile — Ø6 mm, full cut.
Wheel Arch Box Parts
WAF (Front) WAF-[Width]-[Type]
wheel arch front
- Cut-outs: handle catch option, oblong (Concept), Ø35 (Unique), EVO 40×30/Ø6 mm inside (Pro Unique).
- Bottom mortices:Box (Ø6 mm, 6.5 mm deep, profile inside) or Line (Ø10 mm, 6.5 mm deep, profile on).
- Perimeter profile — Ø6 mm.
WAB (Back) WAB-[Width]
wheel arch box back
- Bottom mortices: Box or Line at 6.5 mm deep.
- Perimeter profile — Ø6 mm.
WABB (Bottom) WABB-[Width]
wheel arch box bottom
- Front/back fixing holes — Ø3 mm; min 2 front & back, add at 150 mm if wider.
- Mortices: 4 × Ø6 mm, offset -0.25mm, profile inside
- Perimeter profile — Ø6 mm.
WAS (Sides) WAS-L, WAS-R
wheel arch box sides
- Pivot hole — Ø6 mm peck, through;
- pivotal cut-out — Ø6 mm, offset -0.25mm profile inside.
- 3 × Ø3 mm assembly holes for 40×3.5 screws.
- Bottom mortices: Box or Line at 6.5 mm deep.
- Perimeter profile — Ø6 mm.
Side Panels (separate page)
For side panel codes, heights, depths up to 440 mm, and operations, see the dedicated page.
Open Side Panels Info Page Download: Sides – Toolpath Operations (PDF)
Downloads
Concept Parts (PDF) Unique Parts (PDF) Pro Unique Parts (PDF) Master: All Systems (PDF)
